Search 

The Manufacturing Division of Bet Shemesh Engines has 38 years experience in producing jet engine parts that are of superior quality at competitive prices.

The production of parts for industry leaders such as
Pratt & Whitney, GE Aircraft Engines, MTU, Hamilton Sundstrand and Snecma requires meeting and exceeding the most demanding standards.

Bet Shemesh Engines has an established record of
providing customers with the best possible support for the
critical engine parts they require.

Our customers' confidence and trust in Bet Shemesh Engines
is exemplified by our continued standing as a sole source for
most of the parts produced.

The Manufacturing Division produces gas turbine engine parts
using various technologies.


 Typical parts:


Compressor and turbine disks, from 100 mm up to 1200 mm
Compressor and turbine frames and cases
Compressor and turbine air seals and spacers
Turbine nozzles
Augmentor seals and flaps
Augmentor flame holders
Combustion chambers
Blades and vanes
Machining of cast structural parts

 

 

 

 

 

 




 
Typical applications:


JT8D, JT9D, PW305, PW306, PW307, PW4000, V2500, F100, CF6, CF34, CFM56, J79,   Marbore VI.

 

 Manufacturing technologies:


Turning CNC Horizontal and Vertical up to 1200 mm   

Milling

CNC Horizontal and Vertical; 3,4 & 5 Axis; up to 1000 mm diameter

Laser Drilling 5 Axis, up to 1000 mm diameter
Gun Drilling Deep Holes
Broaching Vertical and Horizontal; up to 12000 mm tools' length each row (2 rows w/elevator)
Grinding

CNC cylindrical int./ext., surface, thread
CNC creep feed for blades & vanes
CNC curvic coupling

Shot Peening CNC 5 Axis
Surface Treatment  Chrome, Nickel, Anodizing, Passivation, Sermetel Coating (see Services)
Thermal Spray

Including, Plasma spray, Thermospray, HVOF and wire metalizing . (Three computerized robotic Sulzer Metco systems)

Sheet Metal Pressing, punching, spinning, shearing, bending
Welding SMAW, TIG including automatic, EBW and Laser, seam, spot & stitch welding
Heat Treatment Several vacuum horizontal furnaces, up to 1370°C, 1219x1524 mm lpsen Abar. Solution, aging, stress relief of stainless steels and heat resistant steels, quenching and tempering, Hip 22,000 psi, 1250°C
Inspection Several CMMs and Optical Comparators, up to 1200mm diameter
N.D.T. F.P.I., M.P.I., Etch inspection, Eddy Current, Ultrasonic inspection (see Services)
Metallurgical & Chemical Laboratory UTS, Elongation, Yield, Creep, Metallography specimens, XRF Analysis (see Services)
 Brazing    Including Vacuum and Tourch Brazing.
 EDM  CNC Mitsubishi Electric Sinking EA12D
 Water Abrasive Jet  CNC FLOW M3-1313b